(603) 654-1280 info@nextmovetech.com

LinkaSat-100

MSRP: Call for Details

The LinkaSat auto acquire and track satellite terminal provides easy setup,acquisition, and remote management of your satellite communications link. The system comes complete with built in GPS,Compass, Power over Ethernet operation, and web based user interface.

LinkaSat provides push button deploy and stow operation which allows for easy acquire and pack up after deployment is over. The user interface provides tools to manually point,store, and recall satellites. Auto acquire and track is accomplished through an iDirect satellite modem interface or optional AVCOM beacon receiver. X and Ka bands are also available.

LinkaSat is also available in 60cm, 80cm, and 120cm models.

Technical Specifications
RF Specifications
Dish 1 meter carbon fiber segmented (7 pedals)
Antenna Beamwidth 1.6° Rx @12.75 GHz , 1.4° @14.5 GHz
Rx Frequency Range 10.70-12.75 GHz
TxFrequency Range 13.75-14.50 GHz
EIRP 46.2 dBW (with standard 6W BUC)
G/T 19.1 dB/K
Polarization Linear Orthogonal
Tx/Rx Port VSWR < 1.5:1
Mechanical/Environmental Specifications
Deployed system weight 70lbs (32kg)
Material / Finish Aluminum with hard coat annodize
Antenna Travel
Azimuth 440° (+/-220°)
Elevation 0°-90°
Polarization 180° (+/-90°)
L-band interface F-Type on both BUC and LNB (standard config)
Temperature
Operational -22 to 140°F (-30 to 60°C)
Survival -40 to 158°F (-40 to 70°C)
Wind
Operational 35MPH, gusting to 50 MPH with anchors
Survival 55 MPH with anchors
Transit Case Roller Type
Case 1 (Positioner) 76 lbs (34.5 kg)
Case 2 (Tripod/Ant) 68 lbs (30.85 kg)
Case 1 Dimensions L: 25.6″ (65cm), W: 19.5″ (50cm), D: 15.6″ (40cm)
      Case 2 Dimensions L: 33.7″ (86cm), W: 28.6″ (73cm), D: 16.4″ (42cm)
System Details
Setup Time Less than 5 minutes (Tool-less)
Acquistion Time Less than 2 minutes
Power  Power over Ethernet 48VDC @ 48 watts
Manual Drive Az,El,Pol (5/16 socket drive)
User Interface Push Button Deploy, Stow and Compass Cal
Remote User Interface Web based user Interface (hosted on positioner)
Modem Interface iDirect (other modem interfaces avail on request)
Beacon Rx interface AVCOM interface
Tracking Tools  Program Track, Step track, and auto repeak
   On board sensors GPS and magnetic compass

Datasheet

Contact us for more information on the LinkaSat 100.

Helpful Links

Documents

Need more information? Click the icon above to visit our Helpful Links section below for more information on this product.

User Interface

All LinkaSat models come with an embedded controller that hosts our User Interface. Learn more about the software tools we offer that make antenna pointing easy.

Accessories

Nextmove offers accessories for use with our antenna positioners. Adapter Brackets, Peripheral Devices, Transit Cases and Tripods to meet your full system needs.

Documents

LinkAlign User Interface Manual

User Interface Overview